EVOLVE200+ Single-Phase Double Pulse MIG Welder

EVOLVE200+ Single-Phase Double Pulse MIG Welder

JASIC EVOLVE200+ single-phase double pulse MIG welder suppors Double Pulse MIG, HF TIG, Lift TIG, and more for welding various materials.
• Advanced DSP microprocessor ensures precise pulse control, enhancing weld quality.
• Double Pulse MIG and single pulse MIG guarantee clean welds with maintained penetration.
• 19 built-in synergic programs save time during setup.
• Glick function enables precise heat input control.
• Inverter Frequency Modulation enhances energy efficiency without compromising performance.
• Seamlessly control remotely via torch or mobile.
• JTECloud Connectivity enabling remote monitoring, data management, and updates.

Download User Manual
Download Brochure
Get a Quotation
ARM Cortex processors
ARM Cortex processors
Inverter frequency Modulation
Inverter frequency Modulation
Fully synergic
Fully synergic
Glick function
Glick function
100 job memory slots
100 job memory slots
4 roll wire feeder
4 roll wire feeder

What is EVOLVE？

It is a new product series developed by JASIC that features full digital control welding machines with IoT technology and cloud service.

Why EVOLVE?

Today’s welding challenges are complex and constantly changing, and a welding machine that can update its processes and functions on demand is JASIC’s response to those challenges. This constantly EVOLVEing machine fits the modern welding environment and survives its challenges.

The EVOLVE200+

Being the introductory model in the range, it brings in JASIC’s concept of advanced digital welding thanks to 4 main aspects of the machine:

Advanced DSP Microprocessor

The ARM Cortex-M4, with its floating-point unit (FPU), is ideal for precise pulse control due to its efficient signal processing. It supports advanced welding algorithms, enhancing the EVOLVE200+’s overall weld quality.

Full Digital HMI (Human-Machine Interface)

EVOLVE’s digital interface provides a seamless, intuitive user experience, regardless of the welder’s distance from the power source.

Mobile App

  • Capable of managing multiple machines
  • Wireless connection via Bluetooth or Wifi
  • Intuitive user interface
  • Comprehensive welding parameter configuration

Inverter Frequency Modulation

This feature boosts EVOLVE200+’s energy efficiency by adjusting its inverters’ switching frequency (26K-40K) based on output. High frequency for low current settings improves arc control, while low frequency for high current reduces power loss and heat.

Glick Function

The “trim” function allows users to adjust output current mid-weld during 4T MIG/TIG welding by pressing the torch trigger. This enables more precise heat control and greater flexibility in weld bead shaping.

Double Pulse MIG Welding

Double pulse MIG welding uses two current pulses per cycle. This stirs the weld pool more effectively than single pulse, resulting in finer grain structure, better weld bead quality, and reduced heat input.

JTECloud

This cloud service aims to provide  comprehensive productivity boost by allowing users to capitalize on the power of welding data and IoT applications.

Professional Welding Cloud Service

  • Welding data documentation, statistics, and analysis
  • Cost calculation and analysis
  • Machine management and maintenance

OTA (Over-the-air) Firmware Update

Users can receive push notification on the EVOLVE200+ whenever there’s a new version of firmware available*.  Upon the user’s approval, the machine will download the updated firmware and complete firmware update process automatically. Note: the machine’s firmware is also downgradable.

On Demand Processes & Functions

To be an EVOLVE welding machine  means being able to renew its processes and functions according to the job’s requirements. When connected to JTECloud, the EVOLVE200+ is able to download new processes and functions, and replace the old ones if the user wishes.

Fully Synergic, Powered by JTECloud

The EVOLVE200+ has 19 built-in synergic programs covering MMA, TIG, MIG/MAG, pulse MIG and double pulse MIG. And on JTECloud, users can have access to an ever-expanding synergic program library. Users can download these on-cloud synergic programs to  the EVOLVE200+ when the machine is connected to JTECloud.

Other Distinguishing Features

A.EVOLVE Digital Torch (Optional)

  • B.Built-in Wire Feed Roller Cabinet
  • C.Wire Feed System’s LED Lighting
  • D.Secured Polarity Switch

    • Featured Video

    Specifications

    EVOLVE200+ N2D2
    ProcessesMMA/MIG/MAG/Pulse MIG/Double Pulse MIG/Lift TIG/HF TIG
    Power supply1ph~AC230 V, 50/60 Hz
    Rated input power5.83 kVA
    Power factor0.65
    Rated efficiency82%
    Rated no-load voltage77 V
    Rated maximum outputMMA 180 A/27.2 V, MIG/MAG 200 A/24 V, Lift TIG/HF TIG 200 A/18 V
    Rated duty cycle25% @40℃
    Welding output rangeMMA 20180 A, MIG/MAG 20200 A, Lift TIG/HF TIG 5~200 A
    Protection classIP23S
    Insulation classH
    Welding wire materialSG2/SST (CrNi)/AlMg5/AlSi4/Cusi3
    Cooling methodAir cooling
    Dimensions605 x 400 x 230 mm
    Weight17.0 kg

    Packing List

    • 1 set 250A-3M MB-24 torch
    • 1 pc accessory color box
    • 2 pcs contact tip 1.2mm
    • 2 pcs contact tip 1.0mm
    • 2 pcs clamps
    • 1 pc Water quick connect socket Φ8
    • 2 pcs wire feeder roller 0.8-1.0mm Vtype
    • 1 pc 3m tube 8*12
    • 1 set : 300A-25mm2-3M earth clamp

    Recommended Products

    Related products